A stochastic-advective transport model for NAPL dissolution and degradation in non-uniform flows in porous media

Remediation schemes for contaminated sites are often evaluated to assess their potential for source zone reduction of mass, or treatment of the contaminant between the source and a control plane (CP) to achieve regulatory limits. In this study, we utilize a stochastic stream tube model to explain the behavior of breakthrough curves (BTCs) across a CP. At the local scale, mass dissolution at the source is combined with an advection model with first-order decay for the dissolved plume. Field-scale averaging is then employed to account for spatial variation in mass within the source zone, and variation in the velocity field. Under the assumption of instantaneous mass transfer from the source to the moving liquid, semi-analytical expressions for the BTC and temporal moments are developed, followed by derivation of expressions for effective velocity, dispersion, and degradation coefficients using the method of moments. It is found that degradation strongly influences the behavior of moments and the effective parameters. While increased heterogeneity in the velocity field results in increased dispersion, degradation causes the center of mass of the plume to shift to earlier times, and reduces the dispersion of the BTC by lowering the concentrations in the tail. Modified definitions of effective parameters are presented for degrading solutes to account for the normalization constant (zeroth moment) that keeps changing with time or distance to the CP. It is shown that anomalous dispersion can result for high degradation rates combined with wide variation in velocity fluctuations. Implications of model results on estimating cleanup times and fulfillment of regulatory limits are discussed. Relating mass removal at the source to flux reductions past a control plane is confounded by many factors. Increased heterogeneity in velocity fields causes mass fluxes past a control plane to persist, however, aggressive remediation between the source and CP can reduce these fluxes.     

应用重组孕激素基因酵母测定饮用水中内分泌干扰物的方法

研究了用重组孕激素受体基因酵母测定饮用水中内分泌干扰物的方法,并利用该种方法检测了南方某水厂不同处理工艺过程水样对孕激素受体活性的抑制水平.结果表明,重组孕激素受体基因酵母能够与孕激素专一性的结合,诱导产生明显的剂量-效应关系,EC₅₀值为0.5 nmol/L,具有较高灵敏度;环境内分泌干扰物五氯酚和壬基酚具有孕激素受体抑制活性,其IC₅₀值分别为2.4μmol/L和3.7μmol/L;重组孕激素受体基因/报道基因的酵母技术是一种筛选和定量分析具有孕激素受体抑制活性的内分泌干扰物的快速、有效方法.结合固相萃取的前处理技术,重组孕激素受体基因酵母对水厂不同处理工艺水样检测出明显的孕激素受体抑制活性,抑制率均大于58%,表明重组孕激素受体基因酵母检测技术能够快速监测和鉴别水样中具有抑制孕激素受体活性的物质.     

Selective removal of common cyanotoxins: a review

Environmental Science and Pollution Research - The development of cyanobacterial blooms can have adverse effects on water bodies and may produce cyanotoxins. Several physical and chemical methods...     

Magnetic nanoparticles incorporation into different substrates for dyes and heavy metals removal—A Review

Environmental Science and Pollution Research - Substantial discharge of hazardous substances, especially dyes and heavy metal ions to the environment, has become a global concern due to...     

印染RO浓水深度处理及回用

采用Fenton-石灰苏打法耦合工艺对某印染厂印染反渗透(RO)浓水进行深度处理。通过实验研究了不同H2O2和Fe2+投加量、p H和反应时间对废水COD去除率的影响,以及不同石灰和碳酸钠投加量对废水硬度的脱除效果,出水回用于染色工段进行染色实验。结果表明,在p H=3.0,Fe2+投加量为1.5 mmol/L,H2O2投加量为3.75 mmol/L,反应时间为45 min,石灰和碳酸钠投加量分别为450 mg/L和1 000 mg/L的条件下,出水COD和硬度的去除率可分别达到73.9%和85.0%,耦合工艺出水水质符合该厂回用染色水标准,且减少了盐的使用,可实现印染RO浓水回用。     

羟基磷灰石的制备及其对水中氟离子的吸附

本研究利用红外光谱(FTIR)、扫描电镜(SEM)和X射线粉末衍射(XRD)观察了共沉淀法合成羟基磷灰石(HAP)的形貌及其晶型结构,并探讨了Ca/P摩尔比、反应时间及反应温度等因素对羟基磷灰石吸附水中氟离子性能的影响。结果表明,n(Ca/P)=1.5/1、反应时间1 h、反应温度40℃、陈化时间48 h、煅烧温度200℃、煅烧时间2 h时,HAP除氟效果最佳,吸附效率和吸附容量分别达到68.8%和6.88 mg/g。实验数据Langmuir等温模式拟合效果优于Freundlich模式,热力学参数计算可知,HAP对氟离子的吸附是自发(ΔG00),吸热(ΔH00),熵增(ΔS00)的过程。HAP对氟离子的吸附符合拟二级反应动力学过程。     

Examination of model predictions at different horizontal grid resolutions

While fluctuations in meteorological and air quality variables occur on a continuum of spatial scales, the horizontal grid spacing of coupled meteorological and photochemical models sets a lower limit on the spatial scales that they can resolve. However, both computational costs and data requirements increase significantly with increasing grid resolution. Therefore, it is important to examine, for any given application, whether the expected benefit of increased grid resolution justifies the extra costs. In this study, we examine temperature and ozone observations and model predictions for three high ozone episodes that occurred over the northeastern United States during the summer of 1995. In the first set of simulations, the meteorological model RAMS4a was run with three two-way nested grids of 108/36/12 km grid spacing covering the United States and the photochemical model UAM-V was run with two grids of 36/12 km grid spacing covering the eastern United States. In the second set of simulations, RAMS4a was run with four two-way nested grids of 108/36/12/4 km grid spacing and UAM-V was run with three grids of 36/12/4 km grid spacing with the finest resolution covering the northeastern United States. Our analysis focuses on the comparison of model predictions for the finest grid domain of the simulations, namely, the region overlapping the 12 km and 4 km domains. A comparison of 12 km versus 4 km fields shows that the increased grid resolution leads to finer texture in the model predictions; however, comparisons of model predictions with observations do not reveal the expected improvement in the predictions. While high-resolution modeling has scientific merit and potential uses, the currently available monitoring networks, in conjunction with the scarceness of highly resolved spatial input data and the limitations of model formulation, do not allow confirmation of the expected superiority of the high-resolution model predictions.The U.S. Governments right to retain a non-exclusive royalty-free licence in and to any copyright is acknowledged.     

Influence of activity and salinity on the weight-dependent oxygen consumption of the rainbow trout Salmo gairdneri

Two types of secretory cell have been found in the cement glands of the cypris larva of Balanus balanoides (L.). Histochemical tests show the presence of proteins, phenols and the enzyme polyphenol oxidase in both the glands and secreted cement. It is proposed that cyprid cement is composed of tanned protein, all the components of which are derived from the cement glands.